Technical Bulletin
Liquid No Wash™
|
|
Technical Bulletin |
|
|
Liquid No Wash™ |
||
|
ALLPRO®
Corporation |
AP7590 - 21261 |
| Description | ALLPRO
Liquid No Wash™ Remover is a thin liquid. It dissolves old varnishes
quickly and is ideal for small areas. It is a professional grade
product. This is a flammable remover.
|
| Prominent Features |
|
| Uses | Ideal
for furniture, including fine antiques.
|
| Limitations | Extremely
flammable. Do not use water for cleanup because it can raise wood grain
or loosen veneer or glue joints. Do not use on linoleum, rubber,
plastic, fiberglass, asphalt tile or other synthetics. Do not use to
strip floors or anyplace a flammable stripper might be hazardous. Liquid
No Wash will remove many types of paint, however, we recommend
semi-paste or heavy body removers for best results on stripping paint.
|
| Surface Preparation | None
required, although user should try to keep the surface horizontal.
Carefully read all precautions and directions before use. Protect hands
with solvent resistant gloves and eyes with safety glasses. Protect
surrounding areas with solvent-resistant drop cloths.
|
| Application | Carefully read all cautions and instructions before use. Apply with an old, or disposable brush. For intricate work flow remover on. Contain excess using absorbent material such as cardboard or rags. For flat surfaces allow the remover to stand undisturbed until the old finish softens enough to be removed with a putty knife. Apply a generous amount of product to surface being stripped. To reduce the concentration of flammable vapors, limit application to an area no larger than two feet by two feet at a time. Some finishes may require more than one application. To remove any remaining deep stain from wood, scrub with household bleach or oxalic acid solution and steel wool.
|
| Clean Up | Wipe
away residue with mineral spirits or paint thinner.
|
| Disposal | Contains
organic solvents which may cause adverse effects to the environment if
disposed of improperly. Place empty containers in normal refuse
for disposal. Contact your local sanitation department or household
hazardous waste coordinator for information concerning possible reuse or
disposal of unused solvent-containing products.
|
|
Caution |
Technical Information |
| WARNING!
Using this product will expose you to Methylene Chloride which is known
to cause cancer.
DANGER! FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL OTHER SOURCES OF IGNITION. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Beware of static electricity that may be generated by synthetic clothing and other sources. Whenever possible, use outdoors in open air area. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms or small enclosed areas. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Open all windows and doors. Use only with a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness, headache, nausea or eye-watering - STOP - ventilation is inadequate. Leave area immediately. DANGER! POISON! May be fatal or cause blindness if swallowed. Vapor harmful. Skin and eye irritant. Contains Methylene Chloride, Xylene and Methanol. Methylene Chloride has caused cancer in certain laboratory animal tests. Risk to your health depends on level and duration of exposure. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. Intentional misuse of this product by deliberately concentrating and inhaling can be harmful or fatal. Cannot be made non-poisonous. For further information, refer to the Material Safety Data Sheet. This product should not be used frequently or on a regular basis without properly engineered air control systems designed to prevent exceeding appropriate TLV. It is intended for occasional use only. Do not take internally. Avoid prolonged or repeated breathing of vapors or mist and contact with skin and eyes. Contact of liquid or vapor with flame or hot surfaces will produce toxic gases and a corrosive residue that will cause deterioration of metal. Close container after each use. Do not reuse this container. For OSHA controlled work place and other regular users - Use only with adequate ventilation under engineered air control systems designed to prevent exceeding appropriate TLV. For occasional use, where engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved self-contained breathing apparatus for chlorinated solvent vapors. A dust mask does not provide protection against vapors. FIRST AID - IF SWALLOWED, call your poison control center, hospital emergency room or physician immediately for instructions to induce vomiting. IN CASE OF EYE CONTACT, immediately flush with water for at least 15 minutes. Get medical attention. FOR SKIN CONTACT, wash with soap and water. If irritation persists, get medical attention. KEEP OUT OF REACH OF CHILDREN. Manufactured For: |
Packaging:
'F' style metal container 2 gallons per case 6 quarts per case Weight Per Gallon: 8.65 lb. excluding container Boiling Range: 104º - 289ºF Vapor Density: Heavier than air % Solids By Weight: 1% % Solids By Volume: < 1% Photochemical Reaction: Non-Photochemically reactive Flash Point: 50ºF (T.C.C.) CPSC Flamm. Class: Flammable Storage: Store in a cool place. Exposure to high temperatures or prolonged exposure to sun can cause can to leak or swell. MAX Vapor Pressure: 100 mm Hg at 20º C Air Quality Data: MAX VOC 487 g/l Analysis CAS |