Acetone 21077

Description	ALLPRO® Acetone is a fast, special purpose thinner, cleaner and remover.
Prominent Features	» 100% pure acetone » Strong, fast acting thinner, cleaner and remover for specified coatings » Non Photochemically reactive » Very fast evaporation rate
Uses	Thins, cleans and removes specified resins, inks, adhesives and contact cements. Use in boat repair and fiberglass projects.
Limitations	Do not use as a general purpose cleaner. Acetone may soften or damage plastics, synthetics and many other finishes.
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing products.

Caution

Technical Information

DANGER! EXTREMELY FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL OTHER SOURCES OF IGNITION. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Beware of static electricity that may be generated by synthetic clothing and other sources. Whenever possible, use outdoors in open air area. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms or small enclosed areas. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Open all windows and doors. Use only with a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness, headache, nausea or eye-watering - STOP - ventilation is inadequate. Leave area immediately. DANGER! Harmful if swallowed. Vapor harmful. Eye irritant. Contains Acetone. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. For further information, refer to the Material Safety Data Sheet. This product should not be used frequently or on a regular basis without properly engineered air control systems designed to prevent exceeding appropriate TLV. It is intended for occasional use only. Do not take internally. Avoid prolonged or repeated breathing of vapors or spray mist. Avoid contact with eyes and prolonged contact with skin. Rinse skin after each use. Close container after each use. Do not reuse this container. For OSHA controlled work place and other regular users - Use only with adequate ventilation under engineered air control systems designed to prevent exceeding appropriate TLV. For occasional use, where engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for organic solvent vapors. A dust mask does not provide protection against vapors. FIRST AID - IF SWALLOWED, call your poison control center, hospital emergency room or physician immediately for instructions. IN CASE OF EYE CONTACT, immediately flush with water for at least 15 minutes. Get medical attention. KEEP OUT OF REACH OF CHILDREN.

Manufactured For:
ALLPRO® Corporation
Brandon, FL 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable.

Packaging: ‘F’ style metal can
4 gallons per case
Weight Per Gallon: 6.6 lb.
Boiling Point: 133º F
Vapor Density: Heavier than air
% Solids By Weight: 0%
% Solids By Volume: 0%
Photochemical Reaction: Non-Photochemically reactive
Flash Point: 0ºF. ( 17.77º C.).
CPSC Flamm. Class.: Extremely flammable
Storage: Keep container tightly closed
when not in use. Store in cool, dry place.
Do not store near flames or at elevated
temperatures.
MAX Vapor Pressure:266 mm Hg at 20 C
Air Quality Data: MAX VOC 788 g/l

Analysis CAS
Acetone (67-64-1)

		Technical Bulletin

		Acetone