Brush & Roller Cleaner 21030 21031

Description	This high performance brush and roller cleaner thoroughly dissolves dried paint and softens bristles, restoring old brushes and roller covers or frames to good, usable condition.
Prominent Features	» Fast acting » Water washable » Keeps brushes in like-new condition » Washes away oil and latex paints and varnishes
Uses	Cleans and reconditions old, hard brushes and rollers. Softens and restores old natural bristle brushes.
Limitations	Do NOT use on "throw away" roller covers or roller covers or frames with old hardened paint.
Application	Carefully read all cautions and instructions before use. Protect hands with solvent-resistant gloves, and eyes with safety glasses. Open can slowly to relieve pressure. To recondition hard brushes: Place brush in metal can such as a coffee can and cover bristles with Brush Cleaner up to the metal ferrule. Soak several hours or overnight until paint is softened. Occasionally agitate brush in cleaner to speed the softening process, and keep container covered with aluminum foil to slow evaporation. After paint has softened, remove residual paint from heel of brush, using a brush, comb or metal fork. As a final cleaning step, agitate the brush in a small amount of fresh Brush Cleaner, then remove brush and lay it on newspapers. Scraping away from the ferrule, press out excess cleaner using a flat scraper. Follow by washing the brush thoroughly in warm soapy water, followed by a rinse of clean water until the bristles are no longer sticky. Do not use hot water. To store the brush, wrap it in heavy paper to preserve its original shape, and lay flat to dry. To clean brushes and roller covers with fresh paint: Agitate them in Brush Cleaner immediately after use, then follow the cleaning and storage procedures described above.
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing products.

Caution

Technical Information

WARNING! Using this product will expose you to Methylene Chloride which is known to cause cancer. DANGER! EXTREMELY FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL OTHER SOURCES OF IGNITION. VAPORS MAY CAUSE FLASH FIRE OR IGNITE EXPLOSIVELY. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Beware of static electricity that may be generated by synthetic clothing and other sources. Whenever possible, use outdoors in open air area. Do not use in areas where vapors can accumulate and concentrate such as basements, bathrooms or small enclosed areas. USE ONLY WITH ADEQUATE VENTILATION TO PREVENT BUILDUP OF VAPORS. Open all windows and doors. Use only with a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness, headache, nausea or eye-watering - STOP - ventilation is inadequate. Leave area immediately. DANGER! May be harmful or fatal if swallowed. Vapor harmful. Skin and eye irritant. Contains Petroleum Distillates, Methylene Chloride, Xylene, Ethanol and Methyl Ethyl Ketone. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. Intentional misuse of this product by deliberately concentrating and inhaling can be harmful or fatal. For further information, refer to the Material Safety Data Sheet. This product should not be used frequently or on a regular basis without properly engineered air control systems designed to prevent exceeding appropriate TLV. It is intended for occasional use only. Do not take internally. Avoid prolonged or repeated breathing of vapors or mist and contact with skin and eyes. Close container after each use. Do not reuse this container. For OSHA controlled work place and other regular users - Use only with adequate ventilation under engineered air control systems designed to prevent exceeding appropriate TLV. For occasional use, where engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for organic solvent vapors. A dust mask does not provide protection against vapors. FIRST AID - IF SWALLOWED, do not induce vomiting. Call your poison control center, hospital emergency room or physician immediately. IN CASE OF EYE CONTACT, immediately flush with water for at least 15 minutes. Get medical attention. FOR SKIN CONTACT, wash with soap and water. If irritation persists, get medical attention. KEEP OUT OF REACH OF CHILDREN.

Manufactured For:
ALLPRO® Corporation
Brandon, FL 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable.

Packaging: ‘F’ style metal container
2 gallons per case
6 quarts per case
Weight Per Gallon: 7.48 lbs./gal. excluding container
Boiling Range: 104º - 383 ºF
Vapor Density: Heavier than air
% Solids By Weight: 0%
% Solids By Volume: 0%
Photochemical Reaction: Non-Photochemically reactive
Flash Point: 39 ºF (T.C.C.)
CPSC Flamm. Class.: Flammable
Storage: Keep container tightly closed.
Isolate from heat, electrical equipment,
sparks, open flames and hot surfaces.
MAX Vapor Pressure: 72 mm Hg at 20º C
Air Quality Data: MAX VOC 696 g/l

Analysis CAS
Xylene (1330-20-7)
Ethanol (64-17-5)
Methyl Ethyl Ketone (78-93-3)
Stoddard Solvent, Type 1 (8052-41-3)
1,2,4-Trimethyl-benzene (95-63-6)
Methylene Chloride (75-09-2)
Ethyl Benzene (100-41-4)

		Technical Bulletin

		Brush & Roller Cleaner