Technical Bulletin
Extra Strength Vinyl 600
|
|
Technical Bulletin |
|
|
Extra Strength Vinyl 600 |
||
|
ALLPRO®
Corporation |
AP6750 - 60010 |
| Description | Extra Strength
Vinyl is a contractor grade clay adhesive. It is excellent for use in
vinyl-over-vinyl applications in conjunction with ALLPRO® SUP•R•PREP™. |
| Prominent Features |
|
| Uses | Recommended for
all weights of wallcoverings. |
| Limitations | Not recommended
for direct application over oil/alkyd primers or paints or for retail
use. |
| Surface Preparation | Surface must be
free from grease and other residues, dry, smooth and structurally sound.
Check surfaces for paint bonding, loose wallcoverings, damaged wallboard
or plaster. Repair all unsound surfaces. Prime all surfaces (including
oil-based coatings) with an acrylic primer, such as ALLPRO® E•Z•
PREP™, SUP•R•PREP™, or ULTRA•PREP™. Before proceeding with
any unusual conditions, consult your adhesive or wallcovering supplier. |
| Application | Use only when the
room temperature is above 50°F. Apply a thin, even coat of adhesive
with a pasting machine, brush or roller. Avoid contact with the surface
of embossed, textured or delicate wallcoverings. Book according to the
wallcovering manufacturer's instructions. For pasting machine use,
thin with a maximum of one pint of water per gallon of adhesive. |
| Clean Up | Before the
adhesive dries, remove the excess with clean water. Additional effort
may be required if the adhesive is allowed to contact the surface of
embossed or textured vinyls. |
| Disposal | Extra Strength
Vinyl is water based and does not contain organic solvents. Place empty
containers in normal refuse for disposal. Contact your local sanitation
department or household hazardous waste coordinator for information
concerning possible reuse or disposal of unused water based paints,
primers or adhesives. |
| Limited Warranty | If,
within twelve months of manufacture and used as directed, this product
is found defective in material or workmanship, it will be replaced
without charge upon presentation of proof of purchase and this used
container. This warranty is in lieu of any other, the exclusive remedy
is limited to replacement of product and ALLPRO disclaims all liability
for consequential damages. Conditions of use are beyond our control.
|
|
Caution |
Technical Information |
| Do
not freeze. Do not take internally. In case of ingestion, seek medical
attention. Avoid contact with skin and eyes. Use of skin and eye
protection is recommended at all times. If contact with eye occurs,
flush with water for 15 minutes. If skin contact occurs, wash with soap
and water. Seek medical attention if rash or other symptoms occur. Do
not mix with other chemicals. Use in a well ventilated work area. Close
containers after each use. Keep out of reach of children.
Manufactured For:
|
Packaging:
Vinyl tubs Color: Tan Weight per Gallon: approx. 10.9 lbs. % Solids by Weight: 48% Viscosity: 60,000 cps - Brookfield viscometer Spreading Rate: approx. 200 sq. ft. per gal. Shelf Life: 1 year minimum Freeze Thaw: Do not freeze Dry Time: Varies depending on temperature and relative humidity. Flash Point: Nonflammable Odor: Low odor Storage: Avoid freezing; keep in cool, dry place Vehicle: Clay & modified starches Air Quality Data: VOC (calculated) 14 g/l Analysis: |