Premier One Elastomeric Sealant Clear

Description	Premier One™ is a Clear Elastomeric Sealant with Urethane and Silicone. This synthetic rubber material has outstanding adhesion to most construction surfaces, and is particularly useful where multiple substrates or different colors are involved. Its elongation and recovery capabilities insure long term service in dynamic movement applications, and it will provide a 50 year life expectancy. Premier One contains a combination of anti-oxidants, UV absorbers and other additives, enabling it to resist the effects of the most severe climatic conditions. It will also adhere to itself for filling larger gaps. Premier One is truly an all-purpose sealant, suitable for virtually any sealing purpose.
Prominent Features	» Guns and stays transparent clear » May be applied to wet surfaces » Paintable » Excellent adhesion to most surfaces » May be applied in low temperatures - as low as 10°F (-12°C) » Outstanding elastomeric properties » High performance synthetic rubber based sealant
Uses	Formulated for use as a general sealant around doors, windows, sills, siding, panels, curtain walls and expansion joints. Particularly useful as a clear where special colors are involved.
Limitations	Not suitable for underwater use.
Surface Preparation	Surface must be clean and free from dirt, dust, grease, oil, mildew, wax, loose paint or wallcovering. When re-caulking, remove all old caulking compound.
Application	Apply to clean, dry or wet surface having no contamination or loose particles at temperatures between 10°F and 120°F (-12°C to 48°C). When applying below 40°F (4°C) Premier One should be stored at room temperature prior to use. Use a standard caulk gun. Cut cartridge nozzle to desired size and puncture inner seal prior to gunning. Can be used in joints between the sizes of 1/8" X 1'4" to 1/2" by 1/2". Can be tooled with finger. Use mineral spirits as a smoothing aid.
Clean Up	Cleanup immediately after use with mineral spirits.
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing adhesives and/or sealants.
Limited Warranty	If, when applied as directed, this material peels, cracks or separates within 50 years after application, it will be replaced without charge upon presentation of proof of purchase and used cartridge. This limited warranty only applies to residential use and damages including consequential damage and other remedies are excluded. No other warranties apply, including fitness for particular purpose.

Caution

Technical Information

WARNING! FLAMMABLE: CONTAINS PETROLEUM DISTILLATE. WILL BURN. MAY BE IGNITED BY SPARKS, HEAT OR OPEN FLAME. USE ONLY WITH ADEQUATE VENTILATION. LACK OF VENTILATION WILL CAUSE EYE AND RESPIRATORY IRRITATION, HEADACHE, DIZZINESS, NAUSEA, AND AT VERY HIGH CONCENTRATIONS, UNCONSCIOUSNESS. DO NOT TAKE INTERNALLY. WASH AFTER HANDLING. HARMFUL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN.

NOTICE: This product contains solvents. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. This product contains chemicals known to the state of California to cause cancer. F, birth defects and reproductive harm. For emergency information call (800) 228-5537. For additional safety information, refer to the Material Safety Data Sheet for this product. Obtain professional advice before using. Close container after each use. FIRST AID: In case of skin contact, wash off quickly with plenty of soap and water, remove contaminated clothing. For eye contact flush eyes immediately with large quantities of water, for at least 15 minutes. Obtain emergency medical treatment. If swallowed, obtain medical treatment immediately. Do not induce vomiting. If inhalation causes physical discomfort, remove to fresh air. If not breathing give mouth to mouth resuscitation. If breathing is difficult, give oxygen. CALL A PHYSICIAN.

Manufactured For:
ALLPRO® Corporation
Brandon, FL 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable.

Packaging: Standard packaging - 10.5 fluid ounce
     composite cartridges
Color: Clear
Weight per Gallon: 7.8 ± 0.2 lbs.
Specific Gravity: 0.92
% Solids by Weight: 67.2% ± 1%
% Solids by Volume: 62.7% ± 1%
Viscosity: Smooth thixotropic paste
Extrudability (ASTM C731): 2 g/s, minimum
Spreading Rate: Approximately 39 linear feet @
     bead of 1/8" x 1/4"
Dry Time: Approximately 24 hours. Paintable with
     oil or latex/acrylic when dry. Usually 72 hours.
Service temp. range: 10°F to 120°F (-12°C to 49°C)
Hardness (ASTM C661): 35 ± 5|
Slump (ASTM C-639): 0.15 maximum
Flash Point: 55°F (12°C)
Odor: Aromatic solvent
Storage: Inside, between 32°F & 100°F (0°C & 38°C)
Shelf Life: 2 years minimum
Vehicle: Blocked rubber
Volatile Portion: Aromatic solvent
Air Quality Data: VOC 33 g/l

Analysis:
Blocked Copolymer Resin (66070-58-4)
Hydrocarbon Resin (68132-00-3)
Toluene (108-88-3)
Petroleum Distillate (64742-89-8)
Contents Partially Unknown

		Technical Bulletin

		Premier One™ Elastomeric Clear Sealant