Painter's Acrylic Latex Caulk Painters Acrylic

Description	Painter's Acrylic Latex Caulk is specially formulated for use with latex and/or oil base paints. Painting not required for longevity. Excellent adhesion to most building materials. Forms a tough - durable and pliable seal. Non-bleeding. Microscopic air has been removed from this product to ensure maximum gunability.
Prominent Features	» Mildew resistant » Paintable » Adheres to most common building surfaces » Provides a weatherproof, flexible seal » 15 year life expectancy » Vacuumized to ensure maximum in durability and gunability
Uses	Ideal for interior and/or exterior sealing of windows, doors, corner joints or anywhere long lasting seal is required.
Limitations	Not suitable for underwater use. Do not apply when rain is expected. Keep from freezing.
Surface Preparation	Surface must be clean, dry and free from dirt, dust, grease, oil, mildew, wax, loose paint or loose wallpaper and old caulking material. When re-caulking remove all old caulking compound.
Application	Apply with a conventional caulking gun to a primed or unprimed, clean surface. Smooth bead with moistened brush or cloth. Excess material may be removed, before cure, with a moistened cloth. For best results, cured beads should be at least 1/8" wide, but not more than 1/2" wide. If joint exceeds 1/2" in depth use a backup filler before caulking. For best results, apply at temperatures above 50° F (10° C). Do not apply when rain is expected.
Clean Up	Clean up immediately after use with warm, soapy water.
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing adhesives and/or sealants.
Limited Warranty	If, when applied as directed, this material peels, cracks or separates within 15 years after application, it will be replaced without charge upon presentation of proof of purchase and used cartridge. This limited warranty only applies to residential use and damages including consequential damage and other remedies are excluded. No other warranties apply, including fitness for particular purpose.

Caution

Technical Information

Do not take internally.

WARNING! CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION. MAY BE HARMFUL IF SWALLOWED. CONTAINS ETHYLENE GLYCOL WHICH CAN CAUSE SEVERE KIDNEY DAMAGE WHEN INGESTED AND HAS BEEN SHOWN TO CAUSE BIRTH DEFECTS IN LABORATORY ANIMALS. POTENTIAL CANCER HAZARD. CONTAINS FORMALDEHYDE WHICH HAS BEEN SHOWN TO CAUSE UPPER RESPIRATORY TRACT CANCER AND ALLERGIC RESPIRATORY REACTION. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN.

NOTICE: This product contains solvents. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. This product contains chemicals known to the state of California to cause cancer. For emergency information call (800) 228-5537. For additional safety information, refer to the Material Safety Data Sheet for this product. Obtain professional advice before using. Close container after each use.

FIRST AID: In case of skin contact, wash off quickly with plenty of soap and water, remove contaminated clothing. For eye contact flush eyes immediately with large quantities of water, for at least 15 minutes. Obtain emergency medical treatment. If swallowed, obtain medical treatment immediately. If inhalation causes physical discomfort, remove to fresh air. If discomfort persists or any breathing difficulty occurs, get medical help.

Material Safety Data Sheets (MSDS) available upon request. Similar information for solvents and other chemicals used with ALLPRO products should be obtained from you supplier(s). When solvents are used, proper safety precautions must be observed.

Manufactured For:
ALLPRO® Corporation
Brandon, FL 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable.

Packaging: Standard packaging - 10.1* fluid ounce plastic cartridges. ( * Packaging in mid-late 2001 changing from 10.5 fl. oz. to 10.1 fl. oz. fill)
Color: White
Weight per Gallon: 13.6 ± 0.2 lbs.
Specific Gravity: 1.62
% Solids by Weight: 68.3% ± 1%
% Solids by Volume: 66.6% ± 1%
pH (when packaged): 8.1 ± 0.2
Viscosity: Smooth thixotropic paste
Extrudability (ASTM C731): 2 g/s, minimum
Spreading Rate: Approximately 46 linear feet @ bead of 1/8" x 1/4"
Dry Time -
Tack Free: 1 hour at 73°F & 40% R.H.
Dry Hard: Approximately 4 - 6 hours. Paintable with oil or latex/acrylic when dry.
Service temp. range: -30°F to 180°F (-34°C to 82°C)
Flexibility (1/4" slab on aluminum @ -15°F, ASTM C734): Pass
Hardness (Shore A Durometer, ASTM D2240): 55
Slump (ASTM D2202): Zero
Flash Point: Nonflammable, waterborne
Odor: Very low
Storage: Inside, between 32°F & 100°F (0°C & 38°C)
Shelf Life: 2 years minimum
Freeze/Thaw (ASTM C731): Passes 5 cycles
Vehicle: Vinyl Acrylic Copolymer
Volatile Portion (Exempt): Water
Volatile Portion (Non-Exempt): Ethylene Glycol / Petroleum Spirits
Air Quality Data: VOC 81.8 g/l (0.68 lb./gal.)

Analysis:
Vinyl Acrylic Copolymer Resin (CAS unknown)
Butyl Benzyl Phthalate (85-68-7)
Petroleum Distillate (8052-41-3)
Calcium Carbonate (471-34-1)
Ethylene Glycol (107-21-1)
Formaldehyde (50-00-0)
Contents Partially Unknown
Water (7732-18-5)

		Technical Bulletin

		Painter's Acrylic Latex Caulk