Tub & Pro Plus Caulk

Description	PRO PLUS Siliconized Acrylic Latex Sealant is a professional grade siliconized acrylic sealant. Its no-crack* formula resists paint film cracking and spider-webbing, and allows paint-over in as little as 30 minutes with a high quality acrylic paint*. Providing superior adhesion and durability on a wide variety of substrates, PRO PLUS is vacuumized, bright white, and easy to gun and tool. Cured sealant is mildew resistant, and meets ASTM C-834, Type OP, Grade -18°C. PRO PLUS forms an airtight seal to provide weatherproofing protection when applied to such surfaces as wood, glass, drywall, plaster, metal, concrete, ceramic tile, and brick. Can be used for interior or exterior applications. When painted over with most premium acrylic latex semi-gloss and gloss paints, this sealant displayed no crazing or spiderwebbing. ** Paint-over time dependent on humidity, temperature, substrate, and paint quality.
Prominent Features	Excellent for new residential construction Fast paint-over time – in 30 minutes* Reduces paint film cracking, shining and paint discoloration Strong adhesive characteristics.» Cured sealant is mildew resistant Meets ASTM C-834, Type P, Grade -18ºC Tough, durable and pliable Silicone fluids are added to help seal out moisture & air, plus improve adhesion & water resistance Non-bleeding Vacuumized - microscopic air has been removed to eliminate pops and spurts during application to assure a smooth, even, non-porous bead.
Uses	Ideal for sealing cracks, seams and joints around doors, windows, baseboards, moulding, pipes, vents, flashing, siding, kitchens and bathroom counters.
Limitations	Not intended for under water use. Do not apply when rain is expected. Keep from freezing. Not for use on food contact areas.
Surface Preparation	Surface must be clean, dry and free from dirt, dust, grease, oil, mildew, wax, loose paint and old caulking material. Prime bare surfaces before caulking
Application	Apply only when sealant and surface temperatures are above 50ºF (10ºC). Cut nozzle at a 45º angle to desired thickness of bead. Apply with a standard or dripless caulking gun. Use steady pressure to completely fill joints. For a neat appearance, smooth bead with a moistened brush or cloth. Remove excess material before cured using a water moistened cloth. For best results, cured beads should be between 1/8" - 1/2" wide and 1/8" - 1/4" deep. Use backing rod or back-up filler such as Ethafoam for cracks deeper than 1/4"
Clean Up	Clean all equipment immediately after use with warm, soapy water
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing adhesives and/or sealants
Limited Warranty	If, when applied as directed, this material peels, cracks or separates within 50 years after application, it will be replaced without charge upon presentation of proof of purchase and used cartridge. This limited warranty only applies to residential use and damages including consequential damage and other remedies are excluded. No other warranties apply, including fitness for particular purpose

U.S. Compliance Information

Technical Information

Do not take internally

WARNING! IRRITATING TO SKIN, EYES, AND RESPIRATORY TRACT. MAY CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION. MAY BE HARMFUL IF SWALLOWED. ADVERSE REPRODUCTIVE EFFECTS REPORTED IN ANIMALS. May cause adverse kidney and liver effects. Contains Ethylene Glycol, Phthalate Ester and Mineral Spirits. Avoid contact with eyes, skin, and clothing. Use in well ventilated area. Wear eye, skin, and respiratory protection. For health information refer to Material Safety Data Sheet or call 518-237-3330. KEEP OUT OF REACH OF CHILDREN. For additional safety information, refer to the Material Safety Data Sheet for this product. Obtain professional advice before using. Close container after each use.

FIRST AID: In case of skin contact, wash off quickly with plenty of soap and water, remove contaminated clothing. Eye contact: Immediately flush with water for 15 minutes and get medical attention if irritation persists. If swallowed: Do not induce vomiting. Give large quantities of water and get medical attention. Never give anything by mouth to an unconscious person. If inhalation causes physical discomfort, remove to fresh air. If discomfort persists or any breathing difficulty occurs, get medical help.

Material Safety Data Sheets (MSDS) available upon request. Similar information for solvents and other chemicals used with ALLPRO products should be obtained from your supplier(s). When solvents are used, proper safety precautions must be observed.

Manufactured For:
ALLPRO® Corporation
Brandon, 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable

Packaging: 10.1 fluid ounce plastic cartridges
Color: White
Data:
% Solids by Weight: 80.63 ± 2%
% Solids by Volume: 69.82 ± 2%
Viscosity: 10 ± 2 seconds (Semco: 1/8" Orifice)
Spreading Rate: Approximately 50 linear feet @ bead of 1/8" x 1/4"
Dry Time -
     Tack Free: 30 min. at 73°F & 40%R.H.
     Dry Hard: Approximately 4 - 6 hours. Paintable with oil or latex/acrylic when dry.
Service temp. range: -30°F to 180°F(-34°C to 82°C)
Flexibility (1/4" slab on aluminum @ -15°F,ASTM C734): Pass
Flash Point: Nonflammable, waterborne
Odor: Very low
Storage: Inside, between 32°F & 100°F(0°C & 38°C)
Shelf Life: 2 years minimum
Freeze/Thaw (ASTM C731): Passes 5 cycles
Vehicle: Siliconized Acrylic Polymer
Volatile Portion (Exempt): Water
Air Quality Data: VOC Content: 2.2%
VOC (less water and exempt compounds): 65.6 g/L

		Technical Bulletin

		PRO PLUS™