Technical Bulletin
Industrial Urethane Enamel
|
|
Technical Bulletin |
|
|
Industrial Urethane Enamel |
||
|
ALLPRO® Corporation |
AP4300 - 12108 |
| Description |
A durable, high gloss urethane-alkyd enamel for use on exterior and interior surfaces. Urethane enhanced formulation for better chemical resistance.
|
| Prominent Features |
|
| Uses |
Formulated for use on wood, metal and cured concrete surfaces such as floors, trim, decks, doors, dadoes, stairs, machinery shelves, etc.
|
| Limitations |
Do not apply when temperature is below 50°F or when rain is expected. Most high gloss enamels become slippery when wet. To ensure maximum safety on horizontal surfaces, a small amount of sand or pumice may be added to give coating nonskid characteristics.
|
| Surface Preparation |
Surface to be painted should be clean and free of oil, grease, wax, dirt, rust, mildew as well as any peeling, flaking or powdering paint. Dull glossy areas by sanding. New concrete should be cured for at least 60 days. New or smooth concrete should be etched with muriatic acid solution before painting. New wood or concrete should be primed with this enamel, thinned with ½ pint of mineral spirits per gallon. Unpainted metal should be primed with a rust preventive primer such as ALLPRO® GuradPro™ Universal Primer or ALLPRO® PDQ™ Quick Dry Primer.
|
| Application |
Stir paint thoroughly before using. Apply with brush, roller or spray. Will cover most previously painted surfaces in one coat. Two coats will give surfaces better durability. Previously uncoated surfaces should be given two coats. Apply a full wet coat of 3 - 4 mils wet film thickness. 1.5 - 2.0 mils dry. No reduction is necessary. If thinning is necessary, use mineral spirits. Do not add any more than ½ pint of mineral spirits per gallon. Remove all splatters immediately with mineral spirits. Airless Spray settings @ 77º: May be force dried at up to 140ºF. Dries
to touch in 6 hours. May be put into service after 12 hours. Recoatable
in 16 - 24 hours. |
| Clean Up |
Clean up immediately after use with mineral
spirits. |
| Disposal |
Contains solvents dispose of properly.
|
|
Caution |
Technical Information |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
COMBUSTIBLE! HARMFUL OR FATAL IF SWALLOWED. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, NOSE, THROAT AND SKIN IRRITATION. CONTAINS MINERAL SPIRITS & Xylene. NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and central nervous system damage. Intentional misuse by deliberately concentrating and inhaling contents may be harmful or fatal. Keep away from heat, sparks and flame. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application an drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate properly fitted respirator (see Code of Federal Regulations 42 CFR 84) during and after application. Follow respirator manufacturer's directions for respirator use. Close container after each use. Do not get in eyes, on skin or on clothing. Wash thoroughly after handling. If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. FIRST AID: in case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse. Destroy contaminated shoes. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If swallowed, do not induce vomiting. Call physician immediately. In case of medical emergency, contact 1-800-424-9300. USE ONLY WITH ADEQUATE VENTILATION ATTENTION: The container is hazardous when empty. Empty container retains explosive vapors and flammable residues. All labeled hazard precautions must be observed. Keep away from heat, sparks, and flames. Do not cut, puncture or weld on or near the container. Not rated for pressure, do not apply air or gas pressure. Do not reuse the container for any purpose. Obtain And Read The Material Safety Data Sheet Before Using. INTENDED FOR INDUSTRIAL USE ONLY. Manufactured For: |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||