Painter's Acrylic

Description	White ALLPRO^® PAINTER'S ACRYLIC Latex Sealant is formulated specifically for the professional paint contractor with good paintability and minimal shrinkage. PAINTER'S ACRYLIC resists cracking, has no after-flow and is easy to tool in all climates. Interior/exterior use with a 25-year guarantee.
Prominent Features	» Interior/Exterior Use » 25 year durability warranty » Cured sealant is mildew resistant » Paintable when dry » Tough, durable and pliable » Easy soap & water cleanup
Uses	Ideal for sealing cracks, seams and joints around windows, doors, woodwork, siding, & flashing.
Limitations	Not intended for under water use. Do not apply when rain is expected. Keep from freezing. Not for use on food contact areas.
Surface Preparation	Surface must be clean, dry and free from dirt, dust, grease, oil, mildew, wax, loose paint and old caulking material. Prime bare surfaces before caulking.
Application	Apply only when sealant and surface temperatures are above 40ºF (10ºC). Cut nozzle at a 45º angle to desired thickness of bead. Apply with a standard or ALLPRO^® Dripless™ caulking gun. Use steady pressure to completely fill joints. For a neat appearance, smooth bead with a moistened brush or cloth. Remove excess material before cured using a water moistened cloth. For best results, cured beads should be between 1/8" - 1/2" wide and 1/8" - 1/4" deep. Use backing rod or back-up filler such as Ethafoam for cracks deeper than 1/4". Allow sealant to dry at least 2 hours (longer in cool or humid conditions) before painting with latex or oil-based paint.
Clean Up	Clean all equipment immediately after use with warm, soapy water
Disposal	Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing adhesives and/or sealants.
Limited Warranty	If, when applied as directed, this material peels, cracks or separates within 25 years after application, it will be replaced without charge upon presentation of proof of purchase and used cartridge. This limited warranty only applies to residential use and damages including consequential damage and other remedies are excluded. No other warranties apply, including fitness for particular purpose.

Caution

Technical Information

WARNING! CONTAINS ETHYLENE GLYCOL, PHTHALATE ESTERS, PETROLEUM DISTILLATES, ACETALDEHYDE, CRYSTALLINE SILICA, ETHYL ACRYLATE & FORMALDEHYDE. May cause eye, skin & respiratory irritation, or allergic skin reaction. Harmful if swallowed or absorbed through skin. Overexposure may cause adverse kidney, cardiovascular & liver effects. Use only with adequate fresh air ventilation. Avoid contact with eyes, skin & clothing. Wear gloves & safety glasses. See MSDS for additional safety information. For an MSDS, contact your supplier, visit www.allprocorp.com/technical.cfm or call 518-237-3330.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

FIRST AID:
SKIN CONTACT: Wash thoroughly.
EYE CONTACT: Immediately flood with large quantities of water for 15 minutes. Get medical attention immediately.
INHALATION: Remove to fresh air. Get medical attention immediately if difficulty continues.
INGESTION: DO NOT INDUCE VOMITING. Get medical attention immediately.

MEDICAL EMERGENCY? CALL 800-327-3874.

KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

Manufactured For:
ALLPRO® Corporation
Brandon, 33511

Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable.

Packaging: Standard packaging - 10.1 fluid ounce plastic cartridges.
Colors: White
Weight per Gallon: 13.8 ± 0.1 lbs.
Specific Gravity: 1.65 ± 0.01
% Solids by Weight: 82% ± 1%
Viscosity: Smooth thixotropic paste
Spreading Rate: Approximately 56 linear feet @ bead of 3/16" x 3/16"
Dry Time -
     Tack Free: 30 minutes at 73°F & 40%R.H.
     Dry Hard: Approximately 4 - 6 hours.
     Paintable with oil or latex/acrylic when dry.
Service temp. range: -10°F to 180°F (-23°C to 82°C)
Flash Point: Nonflammable, waterborne
Odor: Mild
Storage: Inside, between 32°F & 100°F (0°C & 38°C)
Shelf Life: 1 year minimum @ 70°F
Freeze/Thaw (ASTM C731): Passes 5 cycles
Vehicle: Acrylic Polymer
Volatile Portion (Exempt): Water
Volatile Portion (Non-Exempt): Ethylene Glycol / Stoddard Solvent
Air Quality Data: VOC <75 g/l (<4%)

Analysis (CASRN):
Calcium Carbonate (1317-65-3)
Water (7732-18-5)
Nonhazardous Polymer (Proprietary)
Phthalate Esters (Proprietary)
Stoddard Solvent (8052-41-3)
Ethylene Glycol (107-21-1)
Silica, crystalline (14808-60-7)
Titanium Dioxide (13463-67-7)
Ammonia (7664-41-7)
Formaldehyde (50-00-0)
Ethyl Acrylate (140-88-5)
Acrylonitrile (107-13-1)
Acetaldehyde (75-07-0)

		Technical Bulletin

		PAINTER'S ACRYLIC Latex Sealant - White