Technical Bulletin
Fast Dry Polyurethane Clear Sanding Sealer
|
|
Technical Bulletin |
|
|
Fast Dry Polyurethane Clear Sanding Sealer |
||
|
ALLPRO® Corporation |
AP2450 - 30591 |
| Description |
ALLPRO® Fast Dry Polyurethane Sealer is a fast drying, economical drying, easy sanding; satin finish sealer that is ideal for use under polyurethane varnishes.
|
| Prominent Features |
|
| Uses | Ideal
for use in residential and commercial environments. Excellent for coating
unfinished interior wood surfaces such as floors, paneling, plywood, cabinets,
trim and furniture. |
| Limitations | Do
not tint. Thinning is not advised. DO NOT apply at temperatures below
50ºF.
|
| Surface Preparation | Surface
to be coated must be clean, sound, dry and free of rust, grease, oil,
mildew and loose particles prior to application. Old paint films should
be removed with a varnish remover. Residue of varnish remover should be
cleaned off with mineral spirits. Old paint may also be removed by a sanding
machine but care should be taken to remove all dust. Stain wood before
sealing if desired.
|
| Application | Mix
thoroughly. Thinning is not advised. Apply a generous coat with brush,
mop applicator or mohair type roller cover. Apply across the wood grain
and then with the wood grain to ensure complete coverage. For best results,
sand lightly with fine sandpaper. Pick up sanding dust with an ALLPRO
Tack Cloth before finishing.
|
| Clean Up | Clean
up spills and spatters immediately. Clean painting tools with mineral
spirits. Follow manufacturer's recommendations for thorough spray equipment
maintenance.
|
| Disposal | Contains
organic solvents which may cause adverse effects to the environment if
disposed of improperly. Place empty containers in normal refuse
for disposal. Contact your local sanitation department or household hazardous
waste coordinator for information concerning possible reuse or disposal
of unused solvent-containing adhesives and/or sealants.
|
|
Caution |
Technical Information |
|
CAUTION COMBUSTABLE: CONTAINS Petroleum Distillates Keep away from heat and flame. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH - Rule 42 CFR 84) or leave the area. Close container after each use. Avoid contact with skin. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY NOTICE: This product contains solvents. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. This product contains chemicals known to the state of California to cause cancer. For additional information call (800) 323-0633. For additional safety information, refer to the Material Safety Data Sheet for this product. Obtain professional advice before using. Close container after each use. FIRST AID: In case of skin contact, wash off quickly with plenty of soap and water, remove contaminated clothing. For eye contact flush eyes immediately with large quantities of water, for at least 15 minutes. Obtain emergency medical treatment. If swallowed, obtain medical treatment immediately. If inhalation causes physical discomfort, remove to fresh air. If discomfort persists or any breathing difficulty occurs, get medical help. Manufactured For: Note: The information, ratings and opinions stated above pertain to the material currently offered and represent the results of tests and calculations believed to be reliable. |
Packaging: Quart, Gallon & 5 Gallon Color: Clear Weight per Gallon: 7.5 lbs. per gallon % Solids by Weight: 43.5% % Solids by Volume: 34.5% Viscosity: 40 - 50 Sec # 4 Ford Cup Spreading Rate: Smooth Surface: 400 sq. ft. Shelf Life: 2 years Freeze Thaw: Do not freeze Dry Time: At 77ºF and 50% R.H. To touch: 1 hour To recoat: 4 - 6 hours Flash Point: 105ºF Odor: Mineral Spirits Storage: Indoors, between 40º F - 100ºF Vehicle: Polyurethane Alkyd Air Quality Data: VOC maximum of 4.2 lbs/gal (503 g/l) of coating. Analysis: |